产品详情 //

产品性能测试：

Product performance test:

测试条件：

Preparation of test panls:

1、 喷涂底材：ABS底材

1. Substrate: ABS

2、 漆膜厚度：10～15ｕｍ

2. Film thickness: 20~25μm.

3、 烘烤：60℃ X 20min干燥，放置72小时后测试

3. Baking condition: 60℃ X 20min drying, stay for 72 hours before test.

4、 稀释剂：T系列

4. Thinner: T series

注意事项：

Notes:

1、 涂料开罐后，应搅拌至均匀，方可使用。

1. Thoroughly mixed before use.

2、 涂料在室温下不开罐的贮存期为六个月。

2. Storage period of coating is six months in room temperature under tank sealing condition.

3、 请使用指定配套稀释剂。

3. Please use the recommended thinner.

4、 成型时的脱膜剂及其它灰尘等附著物，请在涂装前擦拭干净。

4. The Substrate must be free from lubricant , smut and other dirt prior to application.

5、 视底材不同附著力也有不同，涂装前充分确认漆膜性能。

5. Please confirm the ability of the paint film before application due to its different adhesion on varieties of substrates.

6、 与其它涂料重复涂装时，可能发生龟裂，请先进行充分确认。

6. Please notices that crackling may occur when it coats with other paints.