产品详情 //

产品性能测试：

Product performance test:

测试条件：

Preparation of test panels;

ABS塑胶板，70℃ X 40min干燥，室内放置7天后测试。

ABS plastic panels, cure at 70℃ for 40min stay at room temperature for 7days before test

注意事项：

Notes:

1、 涂料应密封，存放于阴凉干燥处，防水，防晒，防高温，远离火源。

1. Sealed and stored in the dry and cool environment. Kept away from water , sunshine, high-temperature and fire.

2、 涂料在室温下不开罐的贮存期为半年。

2. Storage period of coating is half a year in room temperature under tank sealing condition.

3、 涂料开罐后应充分搅拌均匀，罐底残余涂料应用稀释剂洗净一并混入调漆缸中，以防物料沉底，引起变色或影响性能。

3. Thoroughly mixed before use

4、 涂料稀释后，应用200-400目滤网过滤后再使用。

4. Filtered with 200#~400# silk gauze after thinning.

5、 主剂和固化剂混合后，常温下活化期限为2小时，故应在规定时间内用完。温度20℃以上时，温度越高或者粘度越高，反应会随之加速。请注意。

5. The mixture of lacquer and hardener should be used within 2 hours (RT) , Above 20℃,higher temperature or higher viscosity such conditions can faster the reaction speed.