产品详情 //

产品性能测试：

Product performance test:

测试条件：
Preparation of test panels
ABS塑胶板，80℃ X 30min干燥，室内放置7天后测试。
ABS plastic panels, cure , at 80℃ for 30min stay at room temperature for 7 days before test.
注意事项：
Notes
1、涂料应密封，存放于阴凉干燥处，防水，防晒，防高温，远离火源。
1. Sealed and stored in the dry and cool environment. Kept away from water , sunshine, high-temperature and fire.
2、涂料在室温下不开罐的贮存期为六个月。
2. Storage period of coating is six months in room temperature under tank sealing condition.
3、涂料开罐后应充分搅拌均匀，以防物料沉底，引起变色或影响性能。
3. Thoroughly mixed before use
4、涂料稀释后，应用200-400目滤网过滤后再使用。
4. Filtered with 200#~400# silk gauze after thinning.
5、主剂和固化剂混合后，常温下活化期限为2小时，故应在规定时间内用完。温度20℃以上时，温度越高或者粘度越高，反应会随之加速。请注意。
5. The mixture of lacquer and hardener should be used within 2 hours (RT) , Above 20℃,higher temperature or higher viscosity such conditions can faster the reaction speed.